Airsoft M17 trigger

Sig doesn't make a straight trigger for their Airsoft M17. Cannot be printed out of PLA as it is too weak. I printed it out of PETG at 100% infill and .12mm layers and it works fine. there are two holes in the axle that need to have 1.5mm rods inserted. I used [some of this](https://www.amazon.com/uxcell-1-5mm-Carbon-Fiber-Airplane/dp/B07P6WSSLL/ref=sr_1_fkmr2_1?keywords=1.5mm+cf+rod&qid=1583847624&sr=8-1-fkmr2). let me know of any problems as the angle of the actuator arm had to be guessed a little and may not be quite correct.