Thingiverse
AJS37 Reverser
par MYSE4321
18
Téléchargements
14
Likes
0
Makes
Reverser for SAAB's AJS37 Viggen.
Fully 3d printable, you only need a few screws, magnets and two switches.
Update: 19-08-19
Uploaded correct "Actuator" model file.
Parts list:
4x - 5x5mm, ~10N, magnets, I used [these](https://www.supermagnete.de/eng/cube-magnets-neodymium/cube-magnet-5mm_W-05-N)
2x - Switch with roller. I used [these](https://www.mouser.se/ProductDetail/Apem/MBZ101A01B05B01?qs=sGAEpiMZZMumBvQ1hY%2FfBfZHcRl2RlZVbyxnncLsllc=)
4x - 2,5x12mm screws, used to mount the switches
3x - M3 ≥10mm lenght, countersunk. *Not* longer than 20mm
2x - M3 screw, >10mm to mount it to panel.
5x - M3 nuts
Fully 3d printable, you only need a few screws, magnets and two switches.
Update: 19-08-19
Uploaded correct "Actuator" model file.
Parts list:
4x - 5x5mm, ~10N, magnets, I used [these](https://www.supermagnete.de/eng/cube-magnets-neodymium/cube-magnet-5mm_W-05-N)
2x - Switch with roller. I used [these](https://www.mouser.se/ProductDetail/Apem/MBZ101A01B05B01?qs=sGAEpiMZZMumBvQ1hY%2FfBfZHcRl2RlZVbyxnncLsllc=)
4x - 2,5x12mm screws, used to mount the switches
3x - M3 ≥10mm lenght, countersunk. *Not* longer than 20mm
2x - M3 screw, >10mm to mount it to panel.
5x - M3 nuts
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
