Thingiverse
Aki Lynx5
door moritz2000
0
Downloads
0
Likes
0
Makes
These are spacers which enable 20 mm webbing to be used in the Weblocks Lynx 5 from Aki Slacklines.
There is one version with a clip, which attaches the spacers more securely to the sideplates of the Weblock. This is the version which I would recommend. The clip needs support material. The version with the clip should be rotated for printing, so the clip faces upwards.
For one weblock you'll need two spacers, where **one of it has to be mirrored**. This can be done easily in the slicer.
There is one version with a clip, which attaches the spacers more securely to the sideplates of the Weblock. This is the version which I would recommend. The clip needs support material. The version with the clip should be rotated for printing, so the clip faces upwards.
For one weblock you'll need two spacers, where **one of it has to be mirrored**. This can be done easily in the slicer.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
