Akira Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 139.96x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.07998mm #000000 PLA BambuLab Basic Black Transmission Distance: 1.9 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Scarlet Red At layer #15 (1.28mm) swap to Sunflower Yellow At layer #20 (1.68mm) swap to Jade White for the rest.