Al Capone with Colt 45

Al Capone with his Colt 45.   During the slice there is a good chunky pause at 25%, but just wait it will happen. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm   The Model is 200x133.45mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm   Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ IIID Max Red Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments   Swap Instructions: Start with Black At layer #7 (0.72mm) swap to Red At layer #12 (1.12mm) swap to Pure Yellow At layer #17 (1.52mm) swap to White for the rest. Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag