Alarm Clock Case

I wanted to build an Stereo MP3 Alarm Clock that also can be used as BT A2DP Speaker.
That´s what i created the case for. Feel free to use it for other or similar projects.

**Screws**
- **10x** 2.6x8mm Self Tapping (TM1637+Speakers+SD-Mount)
- **2x** 2x6mm Self Tapping (SD-Card Reader)
- **2x** m2x18mm Screws + Nut (ButtonBar)

**Electronic**
- **2x** Max98357 I2S
- **2x** AIYIMA 1.5 Inch Portable Speakers 4 Ohm 5W 40MM
- **1x** TM1637
- **1x** Mini SD Card Reader
- **3x** Push Buttons 12x12x7,3MM with Caps
- **1x** Small 10x15mm Power Switch
- **1x** USB-C Connector Type-C
- **1x** Double Side 5x7 Prototype Board
- **4x** Adhesive Rubber Feet

And as always some ESP32 (MH-ET), JST-XT Plugs and Cables.

I made two front plates that are slightly different.
Both are for 40mm Speakers but i had two speaker types with different screw hole distances (~47mm and ~50mm)...

A small round rasp is helpful for the button holes or small printing intolerances.
**Hint:** TM1637 at lowest setting st