ALF Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.6x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Lemon YellowBorder Only Colors from here until the end. At layer #23 (1.92mm) swap to Ivory White for the rest.