Thingiverse
Alien_Tray_w/Cap_RX_TX
por OldHead
3
Descargas
1
Likes
0
Makes
Radio tray for the ImpulseRC Alien. A place to mount an RX receiver. I recommend attaching it with a little double face tape and/or a small zip tie.
The antenna tubes were designed to avoid ever being pushed through the back and damaging the RX and/or antennas.
The VTX antenna can be securely fastened to the print. This takes a great deal of stress off the VTX during impacts.
Finally this will hold a 1000uf Capacitor.
IMPORTANT: Round standoffs are REQUIRED. This was not designed with the original hex standoffs.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0chAusOqQYq
The antenna tubes were designed to avoid ever being pushed through the back and damaging the RX and/or antennas.
The VTX antenna can be securely fastened to the print. This takes a great deal of stress off the VTX during impacts.
Finally this will hold a 1000uf Capacitor.
IMPORTANT: Round standoffs are REQUIRED. This was not designed with the original hex standoffs.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0chAusOqQYq
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!