Alien undeground

Picture source - author: Brett Voutier  @brettvoutier Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Size is 150x150. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.1mm and the Actual Depth is 2.1mm   It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.   Filaments Used:   PLA Elegoo+ Black Transmission Distance: 0.3     PLA Sunlu META Grey Transmission Distance: 3.6     PLA BambuLab Basic Orange Transmission Distance: 4.8     PLA Elegoo + White Transmission Distance: 6 This print uses 4 unique filaments   Swap Instructions:     Start with Black     At layer #7 (0.64mm) swap to Grey     At layer #11 (0.96mm) swap to Orange     At layer #12 (1.04mm) swap to White for the rest.