Alitmeter for SimVim 3 Stepper Motors

This is a remix of the Single Stepper Motor Altimeter.

I needed to modify it to operate on 3 stepper motors to use SimVim with X-Plane 11.

You will still need these original items; Bezel_V1, Fondo_Right or Left, Needle1, Needle2, Needle3_10k or 16k, Disco, Knob_V1, Base_V1, Gear_Small, and the printed faces.

Note: if you are using 16k then the cog I named 10000 Needle Cog is the same for the 16k Needle.

After that I simply replaced the back end.
3x New Needle Cogs (100, 1000, 10000)
3x Stepper Motor Cogs (100, 1000, 10000)
Stepper Motor Mounting Plate for 3 motors and the encoder.
Mounting Back Plate
DO NOT PRINT COMPLETE ASSEMBLY this is for reference of assembly.

I used M4x10mm Bolts for the Steppers and M3x10mm to attach the Stepper Motor Mount plate to the Stepper Axel plate and M3x?? (length you need for Bezel through you instrument panel and into the guide plate)
Stepper Motors are 28BYJ-48 with the Full Step Modification as explained on SimVims website.