All the... HueForge

Quote: Joseph CampbellMy own processing graphics Size is 200x150mm, You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.56mm The Max Depth is 1.7mm and the Actual Depth is 1.8mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA Devil Design Light Brown Transmission Distance: 1.6 PLA Elegoo + Gray Transmission Distance: 3 PLA Aurapol Beige Transmission Distance: 2.4 PLA Elegoo + White Transmission Distance: 7This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Light Brown At layer #10 (0.88mm) swap to Gray At layer #12 (1.04mm) swap to Beige At layer #14 (1.2mm) swap to White for the rest. Share your print, and…Boost MeThank you!