Slicer Discord
ALLEN KEY HOLDER  – 3D printable model from MakerWorld MakerWorld
Organizers

ALLEN KEY HOLDER

40 Downloads
12 Likes
6 Makes
Go to Model
Print in place, no supports. I printed mine at 0.3mm layer heights in PETG but I'm sure it'll work with other filament types and finer layer heights.With mine the petg was slightly stringy and it was a little tough to move the rack initially but after that first movement the action was smooth.The fit on the allen keys is also pretty tight initially but I just moved the allen key back and forth in there places to get rid of the strings and bumps. They should fit pretty snuggly after you move them back forth a few times.Metric 1.5-5 includes the following keys:1.5, 2, 2.5, 3, 4, 4.5, 5Metric 5.5-10 includes the following keys:5.5, 6, 7, 8, 9, 10SAE 005-316 includes the following keys:0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16SAE 732-38 includes the following keys:7/32, 1/4, 5/16, 3/8
Category
Organizers
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
print-in-place design · no supports · 0.30mm layers
Support-free Print-in-place
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, PETG
Layer height
0.3 mm
Post-processing
Sanding
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection