Slicer Discord
AllinOne Base Station Version 4.1 – 3D-Druckmodell von Thingiverse Thingiverse
AllinOne Base Station Version 4.1 – Bild 1 AllinOne Base Station Version 4.1 – Bild 2 AllinOne Base Station Version 4.1 – Bild 3 AllinOne Base Station Version 4.1 – Bild 4 AllinOne Base Station Version 4.1 – Bild 5

AllinOne Base Station Version 4.1

63 Downloads
48 Likes
0 Makes
Zum Modell
What we have here is a FULL All in One Base station. Powerful enough to run additional goggles. The on/off switch is more of an on/charge switch, since it is double pole, double thro, when in the off position it allows for charging. Now you could use LiFe batteries or Lipos, but i went with the safety of NiHm. The actual Vrx has a built in DVR and will require modification to utilize, so opening the case is a trick (note remove channel display first) and direct soldering a battery tap and video tap off video #1 which is the one with the flashing red indicator and playback features... so advanced soldering skills are required there. You'll have to shorten the Quantum goggle screen cable and make connections throughout.
The screen is from this...
http://www.hobbyking.com/hobbyking/store/__53706__Quanum_DIY_FPV_Goggle_Set_with_Monitor_KIT_.html
This is the receiver...
http://www.hobbyking.com/hobbyking/store/__64805__Aomway_DVR_5_8GHz_32ch_Video_Receiver_with_Built_in_Video_Recorder.h
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen