Thingiverse
Allo Volt+ Case
door kromman
1
Downloads
1
Likes
0
Makes
Creating from scratch with manual measuring Allo Volt+ PCB (https://allo.com/sparky/volt-plus-amp.html) (sorry from measuring errors).
Tested with print. All parts OK. Some sanding needed (used nail file).
To lock parts together use same M3 screws (12-14mm long) and 35mm brass standoff spacer (https://www.aliexpress.com/item/1005001479466801.html?spm=a2g0s.9042311.0.0.4a024c4dxYR7Xn).
Printed with stock settings on Ender 3 V2.
- resolution - 0.2 (layer high)
- infill - 20%
- support...only for top cover and feets
- materil PLA (brand: Fiber3D)
Top_V2 - no tested with print; designed to cover holes for sidewalls
Tested with print. All parts OK. Some sanding needed (used nail file).
To lock parts together use same M3 screws (12-14mm long) and 35mm brass standoff spacer (https://www.aliexpress.com/item/1005001479466801.html?spm=a2g0s.9042311.0.0.4a024c4dxYR7Xn).
Printed with stock settings on Ender 3 V2.
- resolution - 0.2 (layer high)
- infill - 20%
- support...only for top cover and feets
- materil PLA (brand: Fiber3D)
Top_V2 - no tested with print; designed to cover holes for sidewalls
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!