Alternative Arm with Modified Hooked End

The combined wire manager and outfeed table holder for the DeWalt DW725 planer, available here:https://makerworld.com/en/models/1860680-dewalt-dw735-planer-cable-and-outfeed-table-holder#profileId-1990063has two arms with hooked ends to hold the folded outfeed table. In the original design the holes for the two M5*M12 bolts (actually, those screws´d rather be longer than 12 mm) which act as axes for the arms have a too big diameter - those holes are sort of drop-in rather than screw-in size for this bolt type - at least when printed on my AD5MPro which is, I daresay, pretty well-calibrated in terms of delivering correct sizes. So if the main holder parts are installed as intended by the original author, these bolts just fall out to the ground out of their openings. M6 bolts however are too big for this purpose. An easy fix would be to install the main holder parts with the swivel arms facing upwards instead of downwards, so that these two axis bolts are now insertable from the top - in