Thingiverse
Alternative Mounting for Kinect2
door m-sriubiskis
9
Downloads
7
Likes
0
Makes
I needed to remove the microphone but still have a stable method for mounting the xbox kinect2 so I designed these two pieces to mount the device to an enclosure.
You can see how to take the device a part here:
https://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
If you want to have a different power supply you can see that here:
http://www.tatsch.it/kinect-2-usb-3-modification/
(WARNING: you can really screw up the kinect like this)
To mount it I used:
6-32 machine screws
6-32 hex nut
Number 6 washers
To assemble please refer to my pictures
Tips:
- The fit should be tight for the part you insert, if the print is quality it won't break when you tap it in with a hammer
- The hardest part is lining up the two mounts, once those are in place just slide the kinect in and screw in the front
- Be really careful when taking the kinect a part
NOTE: This is for educational purposes and I am not encouraging you to tamper with an Xbox Kinect. If you chose to
You can see how to take the device a part here:
https://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
If you want to have a different power supply you can see that here:
http://www.tatsch.it/kinect-2-usb-3-modification/
(WARNING: you can really screw up the kinect like this)
To mount it I used:
6-32 machine screws
6-32 hex nut
Number 6 washers
To assemble please refer to my pictures
Tips:
- The fit should be tight for the part you insert, if the print is quality it won't break when you tap it in with a hammer
- The hardest part is lining up the two mounts, once those are in place just slide the kinect in and screw in the front
- Be really careful when taking the kinect a part
NOTE: This is for educational purposes and I am not encouraging you to tamper with an Xbox Kinect. If you chose to
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
