AM40 Improved thrust vector motor mount

After some in flight failures of the original thrust vector motor mount provided by RC-Factory on their indoor foamies I decided to redesign and improve it.The original model has a lot of thin printed plastic space between the mount ball-links and the actual motor attachment screws.in the redesign I rotated the motor so the motor mounting screws are very close to the ball link attachment points, also the vector thrust arm is now much closer to one of the motor screws. This effectively uses the aluminium backside of the motor for rigidity instead of relying on 3D printed plastic.I also changed the way the vector mount is attached to the plane, the screws now tap into the printed plastic. This makes the head of the 1.5mm hex bolts stop the ball links from being detachable in air. As this is also one of the failures which happened with the original mount when the AM40 aggresively changes direction for 4D flight. Please note! - Because the ball links now screw into the plastic the mounting