AM8 Power Switch Box

This box houses a standard SPST rocker switch for an AM8 extrusion frame.
The wires from the switch are designed to come out into the bottom channel of the extrusion. Since the wires fill up the slot, I made both left and right side attachment versions. (use the left side attachment version if your wires are to exit from the right and vice versa)

The switch dimensions are ~10.28mm x ~29mm with the retaining clips compressed. I bought the switch on Amazon, but I believe it is a standard size for SPST switches.
https://www.amazon.com/gp/product/B071FJ4NYV/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Overall box dimensions (including mounting) are: ~35mm wide x 50mm long x 40mm high

I've included the sketchup files in case you want to modify for your own needs.

Note that I had to solder wires on to the switch blades instead of using connectors. I wanted the box to be the same 40mm height as the extrusion and the wire connectors made the switch assembly too tall to fit.