Thingiverse
Amcrest 4K POE Security Camera Mount
by engineerily
15
Downloads
9
Likes
0
Makes
This original design mounts an Amcrest UltraHD 4K (8MP) Outdoor Security IP Turret PoE Camera to an external roof rafter of various angles. You will need six Outdoor wood screws shorter than 39mm (the thickness of my rafters). I colored my tan deck screws with a Sharpie for aesthetics.
Installation steps:
1. Use the screws included with the camera to mount the metal housing to the printed mount. Make sure the screws are tight but don't strip them.
2. Install the o-ring on the camera waterproof POE connector per the instructions
3. Bring up the ladder to your camera mounting point the following items: camera, camera outside housing piece, star key wrench included with camera, printed mount with attached metal housing with loosened grub screw, waterproof POE connector pieces, 6x wood screws, and drill with screw bit. Also a Sharpie if you wish.
3. At the mounting point, stick the terminated & tested Ethernet cable (CAT5e, for example) through the mount hole from the top. Install
Installation steps:
1. Use the screws included with the camera to mount the metal housing to the printed mount. Make sure the screws are tight but don't strip them.
2. Install the o-ring on the camera waterproof POE connector per the instructions
3. Bring up the ladder to your camera mounting point the following items: camera, camera outside housing piece, star key wrench included with camera, printed mount with attached metal housing with loosened grub screw, waterproof POE connector pieces, 6x wood screws, and drill with screw bit. Also a Sharpie if you wish.
3. At the mounting point, stick the terminated & tested Ethernet cable (CAT5e, for example) through the mount hole from the top. Install
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!