Slicer Discord
Ames window illusion/paradox – 3D-printbaar model van MakerWorld MakerWorld
Puzzles

Ames window illusion/paradox

door asprint · Puzzles
37 Downloads
21 Likes
11 Makes
Model downloaden
Motorized Ames window. For some it looks like the window is spinning in fuller circles, and for most people it looks like it is doing half circles, and going the other way. If a 3d object is placed on the small end of the window then it looks like is is phasing through. To see it best stand five feet away with you eyes level with the window. Then close one eye, and focus on a end. Adding a clip on the end amplifies the effect.assembly.put the motor in the motor casing through the bottomget the bottom lid and four screws. put the lid over the bottom of the motor and align the holes, then screw in the bolts. don't over tighten.take the big gear, and put the rod sticking out of it into the big hole on the side of the motor mount. screw a nut onto the bottom of the big gear when it is in. put he small gear onto he motor shaft.put the window into the hole in the top of the big gear. as shownoptional. alighn the support holes with the two other holes on the mount. then put two bolts to s
Categorie
Puzzles
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie