Amiibo NFC Coin

This is the coin I designed for use with 25mm NFC Ntag215 for amiibo. It is designed to fit a 25mm diameter plexiglass with a 2mm thickness.Parts you need:1. TPU Printed Coin2.Plexiglass 1 inches (25mm) diameter, 2 mm thick. The plexiglass I have actually measured 24.7 mm in diameter and 1.7 mm thick. The model is designed to fit this plexiglass.3. NTAG 215 25 mm. The NFC tag I got from Amazon is exactly 25 mm and will have a tight fit inside the print profile4. Printed Images (optional) - I asked ChatGPT to create a canvass with 12 circular bordered images on a 6"x4" and print it off on a glossy print paper.To make your own Amiibo:Follow this Reddit post for instructions. Disclaimer: I did not make this post or the guide in this post. I simply followed this guide and worked well for me. Basically, you need:Smartphone with NFC capability (Most modern phones have this)TagMo App (for Android)NTag 215 NFC TagI haven't tested to print this model on another filament other than T