Slicer Discord
AmpliTune Compact – 3D-Druckmodell von MakerOnline MakerOnline
AmpliTune Compact – Bild 1 AmpliTune Compact – Bild 2
Hobby&DIY

AmpliTune Compact

70 Downloads
11 Likes
0 Makes
Zum Modell
AmpliTune Compact is the passive amplifier in the AmpliTune series that delivers the highest volume boost for your smartphone. With an increase of 11 decibels compared to the device's maximum volume (tested with an Oppo Find X5 and a sample track on Spotify), the enhancement is clearly audible, making Compact perfect for those who want a significantly more powerful audio experience. The sound can be projected from either the right or left side thanks to an innovative dual-direction sound channel, offering greater versatility and balanced acoustics. AmpliTune Compact features a simple yet functional design, shaped as a parallelepiped with dimensions of 150mm wide, 60mm high, and 60mm deep, making it ideal for any setting, from a desk to a living room. The smartphone slot has been improved over previous models, measuring 80mm in length, 12mm in width, and 15.5mm in height, with a 7° inclination to ensure a stable and convenient position. The sound transport grooves have been enlarged (15x12mm) and are positioned on both the right and left sides of the slot. Both grooves lead to the amplification cones, which are connected by a central channel with a diameter of 4mm, optimizing sound diffusion. AmpliTune Compact is compatible with most devices on the market, offering superior audio performance in terms of volume and sound quality. It’s the perfect accessory for those seeking a practical and powerful amplifier without compromising on design or compatibility. Recommended Printing Parameters: Nozzle: 0.4mm Layer height: 0.2mm Infill: 15% grid pattern Walls: 2 Supports: Not required Brim: Not needed AmpliTune Compact represents the pinnacle of power and functionality in the AmpliTune series, making it ideal for everyday use or as a gift for tech enthusiasts and audio lovers.
Kategorie
Hobby&DIY
Quelle
MakerOnline
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Mittlere Konfidenz
Warum?
0.40mm Schichten
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Mindest-Druckbett
15 mm (Klein)
Schichthöhe
0.4 mm
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Sparks3D veröffentlicht auch auf

352 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen