MakerWorld

Other Hobby & DIY

AMS Holder P1P

by FROSTYPRINT · Other Hobby & DIY

10 Downloads

4 Likes

4 Makes

Accessoire pour installer facilement le module AMS au dessus de la P1P.Impression en 0.28 (environ 3H en PETG avec la P1P).Supports requis. Accessory for easy installation of AMS for BambuLab P1PPrinted in 0.28 (approximately 3H with PETG on P1P).Supports required.

Category

Other Hobby & DIY

Source

MakerWorld

Published

07.03.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 2 colors

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PETG

Colors

2 (AMS/MMU recommended)

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does AMS Holder P1P need supports when printing?

Yes, AMS Holder P1P will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print AMS Holder P1P?

According to the design notes, AMS Holder P1P takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is AMS Holder P1P available in?

AMS Holder P1P is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is AMS Holder P1P free to download?

Yes, AMS Holder P1P is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

AMS Holder P1P

Similar Models

Add to Collection