AMS Lite mount

Hi everyone, This is my idea and upgrade proposal for AMS Lite stand/mount. This mount keeps the AMS level and 150mm of the table, as shown in the attached pictures this stops the teflon tubes and printer head wire flopping about and holds them in a smooth arc and between the mount legs there is room for the print bed wire.Print material: PETG (defalut presets)wall loops: 4 The STL model has individual parts but saved assembled IF you want to print it in one go as one part with no assembly required.For easier programing and use of less material the .3mf file attached is with split objects (parts) which will require 7 wood screws 40-50mm long to assemble, as showen below.Top 4 screws, might need adjusting for the countersink head diameter, it needs to be around Ø 7.5mm.