AMS Modular Rack (Original & 2 Pro)

!!! IMPORTANT NOTE !!! Apparently there are MANY versions of the original AMS. The print profile I have currently online works if you have the AMS with a mid section spacing of 86mm:We encountered at least 2 more versions so far and try to come up with a universal rail that works maybe even for AMS 2 Pro. !!! IMPORTANT NOTE !!! This is my approach of a modular AMS Rack system. It supports the original AMS as well as the new AMS 2 Pro. The system can be extended infinitely and is designed with a minimal parts approach. Hardware List2020 (Grove 6) Aluminum Extrusion400mm Full-Extension Ball Bearing Rails (GTV Versalite+)Screws:ISO 7380-2 M5x8ISO 7380-2 M4x16ISO 7380-2 M4x6Nuts:T-NUT (Grove 6) M5NUT M4The rest is pretty much printed. If you want a rack that simply holds two AMS units (like in my photos) just print the “TOP” module and add 4 end caps for the bottom. Step 1 - Select a module and gather the necessary hardware:<img src="https://makerworld.bblmw.com/makerworld/model/DSM0000000