AMS Riser X1C - lightweight

Hey everyone! I'm thrilled to finally share something I’ve been working on for a while—the new AMS Riser. If you’ve been frustrated with long print times and how much material other models waste, trust me, I've been there too. The new AMS Riser is all about speed, efficiency, and cutting down on wasted material. I’ve fine-tuned the design to make sure it delivers enough sturdines with way less material and made much faster, while still looking good. You can choose to glue it together, or use 6 screws, totaly up to you. If you choose to use screws, you can disassemble it anytime you want. I recommend printing in PETG and you will need a little under 2kg. There are also seals made from TPU, but you can use some foam sealing tape with maximum thickness under 3mm instead. Total print time is around 2days 14hours. There is also a place to store up to 3 plates and slot for the glass panel. The glass is at an angle to make sute it wont fall out when the printer shakes rapidly. It is u