Slicer Discord
AMS shelf   (stacking system) – Modello 3D stampabile da MakerWorld MakerWorld
3D Printer Parts

AMS shelf (stacking system)

98 Download
191 Likes
1 Makes
Vai al Modello
DescriptionI needed to organize my new AMS... At home I had some wooden tables and 2 old tent poles. That's all! ATTENTION: I noticed that my 2 poles have slight proportional differences. So if your case also falls among these, you will have to play around with the percentages a bit. 101% or 102% for example.In fact, the first pole had a diameter of 20.2mm on the outside and 18.3mm on the inside. The second pole instead is externally 20.6mm and internally 18.5mm. Keep this in mind if you wish to replicate this project of mine. PROCESSING PHASES (step by step) attached - AMS MAGNETIC LOCKING -The shelf has 33cm height spaces. Minimum and sufficient height to extract and store the reels. I also thought of inserting a magnet into the shelf (⌀20mm hole, neodymium magnet with hole for wood screw, cover cap), and a second smaller magnet inside the AMS handle. This will keep the AMS cover magnetically open during the coil changing phase. This seemed like a useful addition! - EXTRA WORKING
Categoria
3D Printer Parts
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Perché?
2 colori
Pezzo unico 2 colori / AMS Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA, Wood PLA
Colori
2 (AMS/MMU consigliato)
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione