AMS side mount spool holder

I wanted a side spool holder that doesn't require the BL metal bracket wich i didn't have.After searching for different models, none was satisfying or didn't work fine (Filament too hard to pull and leads to under extrusion).So, i came up with the idea or merging two different design all together to do what i intended.I simply used the idea from Poli27 but I’ve redone the whole design from scratch with Onshape.I adapted the design so i can fit the spool design from Termiman. BENEFITS:No OEM bracket required.Easy spool swapEasy to feed filament inside the PTFE BOM:2pcs 608 bearing Amazon link1pcs PC4-M10 PTFE connector Amazon link4pcs M4 x 20 Bolts4pcs M4 x 20 Bolts8 pcs M4 Nuts17cm PTFE from Bambu Lab *Important so the filament slide freely. PRINTING:Nozzle: 0.4mmLayer Height: 0.2mmWalls: 4+Infill: GyroidInfill : 15%Brims: DisabledTextured PEI plateSupport required for the roller (under and at both ends) *This part will require a little bit of sanding for the bearing to fitOther parts