Slicer Discord
AMS Universal Small Spool Adapter – 3D-Druckmodell von MakerWorld MakerWorld
3D Printer Accessories

AMS Universal Small Spool Adapter

23.9k Downloads
3.6k Likes
23.1k Makes
Zum Modell
Update I have added a new Version (v2) with a narrower diameter. The diameter was reduced from 46,5 mm (v1) to 39,5 mm (v2) to fit even more brands like the Sunlu 250g spools. Description This adapter allows the use of small spools (e.g. 250g, 500g, 750g) in Bambu Lab's AMS. I have tested many AMS modifications. Some of my small spools worked very well with them, but others did not. Then I tested different adapters for small spools, but they also fit some of my spools, but not all. So I decided to develop my own universal adapter. And here it is. Function The two side parts screw into each other and can cover a flexible spool width of 35-63 mm. This adapter can also be used to patch broken (large) spools, allowing them to continue to be used in the AMS. The inside of the screw cap can be filled with a weight if your spool is too light. On the outside there are grooves into which the filament end can be clamped. Print settings I recommend using PETG or a more robust material. PLA will o
Kategorie
3D Printer Accessories
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, PETG
Farben
2 (AMS/MMU empfohlen)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen