AMS2 Pro 90° Data Cable Connector

This model replaces the straight rubber shell on the original Bambu Lab AMS 2 Pro data cable with a compact 90° connector housing. The stock cable exits straight from the printer. When the printer is placed close to a wall or inside a cabinet, there is often not enough clearance behind the machine. The cable bends sharply and puts unnecessary stress on the connector. This modification is useful when using AMS 2 Pro systems that use the 6-pin data cable connection. Compatibility • Compatible with all Bambu Lab printers using AMS 2 Pro• Designed for the 6-pin AMS data cable Installation You must remove the original rubber shell from the connector and replace it with the printed housing. Steps:Carefully cut and remove the original rubber strain relief from the AMS data cable connector.Do not damage the connector or internal wires.Place the connector inside the printed housing.Align the cable exit direction.Secure the connector inside the housing with glue.Glue is required to keep the conn