Anders PKD illuminated stand

Illuminated display stand for the AndersFP PKD-2019
https://www.thingiverse.com/thing:4260720

Updated: I've seperated the front post from the base to make printing it a little easier. Also added a new mid section with more room for wiring either side of the battery box.

You will require:
1x AAA battery box
https://www.amazon.co.uk/gp/product/B07MSFXVFJ/

4x 3mm LED

1x switch
https://www.amazon.co.uk/gp/product/B01NCZ0EJB/

1x 5mm dia. by 5mm neodynium magnet

11x M3x3mm thread insert

11x Countersunk M3x8mm

1x M5x25 (if you assembled the Anders PKD you'll have some floating around)

The switch goes in the rear section where it's hidden by the gun when placed on the base. The battery box goes in the centre section and the magnet goes into the top of the pillar on the front section where it connects to the M5 bolt in the front of the gun.

The front pillar will need M5 thread cutting into it where it connects to the base.

The thing is in so many pieces beca