Anet A2 E3DV6 Sensor Mount.

I printed the E3DV6 mounting parts by carstenheuer(https://www.thingiverse.com/thing:2282071) and a new x-axis plate (https://www.thingiverse.com/thing:2753267) but needed a mount for my bed sensor. I started with the one by Karl_FLG(https://www.thingiverse.com/thing:2065355), and extended it to clear the fan duct- my sensor requires the 17mm version, while the original one appeared to have a 13mm hole for the sensor.

So after actually printing this and doing my switch over to e3d v6.. with a detour over a bricked main board.. I got it all put together and realized that the sensor mount would hit the frame when the x-carriage ran to the endstop.. so I redesigned the one with the larger hole- turned out 17mm was too tight as well- so I removed the first 2 attempts and uploaded the final product.

The offset for Marlin for the level sensor is -46x and -11y

2018.02.02 after using 2mm screws the first time through, I decided to redesign for 3mm screws- the holes are 3.1mm- I'm als