Anet A6 Mainboard case

This is a case for the main-board on the Anet A6. There are 2 versions available: the original case V1 which is smaller and only fits the stock A6 mainboard (as shown in white), V2 is a newer case which is larger and can mount the stock mainboard or an Arduino ATmega2560 with a RAMPS shield (as shown in Bronze) plus other components.

They contain all the wires within the case and make the elecronics overall far neater and more protected. There are plenty of cooling holes to prevent overheating of the board. I have also included .STEP files of blank versions of the mainboard covers if you want to make custom holes for cooling fans.

V1.
It mounts onto the frame using the same bolts which hold the main-board, with spacers incorporated into the case.
The wires are fed through a gap in the top of the case, including the X axis wires.
The cover is held onto the case using two M3 x 18 bolts (there are many spares with the printer kit) which screw into two M3 nuts held in the case