Thingiverse
Anet A8 Full case design
por ImtehQ
7
Descargas
2
Likes
0
Makes
tESTED AND FAILED, DONT PRINT TILL I UPDATE IT!
WORK IN PROGRESS AND UNTESTED!!!!
Again! This is untested, i make changes to it as i go, I did and will find more issues with the design, please dont download and print it all before everything it made!
Work in progress design, at the time of upload the prints are being printed.
The design of the case is so that the printer can slide out the case so you can access it, every orange part in the design are 3d printed and fit on a 220mm X 220mm bed.
Everything else is 12mm MDF wood panels, and some Plexiglass
Design was made so there is minimum wood work required, the Plexiglass panels can be glues or hold in place by little holders (included)
On the back of the design is a hole for a 120mm fan but more blueprint will be uploaded soon.
I will also include pictures as i build it and keep updating this.
Im printing all the parts at 20% infill.
Update: (5/10/18)
+ After printing a few parts i found out that 8mm is to big
WORK IN PROGRESS AND UNTESTED!!!!
Again! This is untested, i make changes to it as i go, I did and will find more issues with the design, please dont download and print it all before everything it made!
Work in progress design, at the time of upload the prints are being printed.
The design of the case is so that the printer can slide out the case so you can access it, every orange part in the design are 3d printed and fit on a 220mm X 220mm bed.
Everything else is 12mm MDF wood panels, and some Plexiglass
Design was made so there is minimum wood work required, the Plexiglass panels can be glues or hold in place by little holders (included)
On the back of the design is a hole for a 120mm fan but more blueprint will be uploaded soon.
I will also include pictures as i build it and keep updating this.
Im printing all the parts at 20% infill.
Update: (5/10/18)
+ After printing a few parts i found out that 8mm is to big
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!