Thingiverse
Anet A8 X Axis IP camera bracket
21
Téléchargements
18
Likes
0
Makes
IP camera with the circular design, lots of different cameras have this style they will all work because they are knock offs of one another.
You may need longer bolts depending on the thickness of your x motor bracket but I was able to secure it with the stock bolts.
This mounts to the right side bolts of the X motor bracket on the Z lead screw, it leaves enough room for belt maitenence if you have the open style motor bracket. It is set to a good angle to view prints through the IP camera. You can use this over the internet or your local network allowing you to monitor the print from where ever.
Here is a project tutorial on this simple build: https://youtu.be/xe8wTu0U4_U
Let me know if you have any questions or modification suggestions!
You may need longer bolts depending on the thickness of your x motor bracket but I was able to secure it with the stock bolts.
This mounts to the right side bolts of the X motor bracket on the Z lead screw, it leaves enough room for belt maitenence if you have the open style motor bracket. It is set to a good angle to view prints through the IP camera. You can use this over the internet or your local network allowing you to monitor the print from where ever.
Here is a project tutorial on this simple build: https://youtu.be/xe8wTu0U4_U
Let me know if you have any questions or modification suggestions!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !