Angel transparent

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Pink Transmission Distance: 8 PLA sunlu black Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with White At layer #8 (0.72mm) swap to Pink At layer #11 (0.96mm