Angry bird Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 92.03x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Smart Recycled Red Transmission Distance: 4.4PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA Chrominal Deep Sea Blue Transmission Distance: 6PLA Jessie Premium Yellow Bird Transmission Distance: 4This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #11 (0.96mm) swap to Blue GrayAt layer #15 (1.28mm) swap to Deep Sea BlueAt layer #16 (1.36mm) swap to Yellow Bird for the rest.