Thingiverse
Anker 313 wall mount
por DerKai3100
0
Descargas
2
Likes
0
Makes
Anker 313 wall mount.
The backplate is needed to be glued on a wall, the top is then screwed in with 3x M3X12 screws.
I used 3x M3X5X5 thread inserts for the backplate.
Due to the rough surface, I made a cutout in the back plate to avoid scratching the charging pad. To prevent the charging pad from wobbling, I put some hot glue in the recess.
The backplate is needed to be glued on a wall, the top is then screwed in with 3x M3X12 screws.
I used 3x M3X5X5 thread inserts for the backplate.
Due to the rough surface, I made a cutout in the back plate to avoid scratching the charging pad. To prevent the charging pad from wobbling, I put some hot glue in the recess.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!