Anna Inspired Hueforge

Project: Anna.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.68mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #41273b PLA Paramount 3D Decepticon Purple Transmission Distance: 1.8 #7d0bff PLA Bambu Purple Transmission Distance: 1.4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #13 (1.12mm) swap to Decepticon Purple At layer #14 (1.2mm) swap to Purple At layer #16 (1.36mm) swap to White for the rest.