Another LithoBox

As Christmas is nearing and as it's always a difficult task to find gifts for my parents and grandparents I thought lithophanes would be nice.

But of course they need something to hold them and provide the backlight needed.
So of course I went and designed Another LithoBox.

The box holds 4 Lithophanes 148mmx100mmx4mm on the sides and if you think heat from the LED lightbulb will not be a problem (I am still printing and will test one that is closed by 5 lithophanes) you can put one 149.8mmx149.8mmx4mm on top instead of the honeycomb cover.

Tolerances are 0.1mm in all Directions

For One Lithobox with 4 Sides and a roof with honeycomb cover you need:

1xStand.stl
1xBase.stl
1xRoofHoneyComb.stl
4xCorner.stl
OR
1xStand.stl
1xBase-Pin.stl
1xRoofHoneyComb-Corners-Pin.stl

If you want to be able to put in a Litophane on top you can use
Roof.stl or Roof-Corners-Pin.stl
depending on which way you choose (Corners printed solo or included in the roof).
In case you don'