Thingiverse
Another Mini-nuke
von RustyRabbit
47
Downloads
40
Likes
0
Makes
This is a Fallout-inspired Mini-nuke shaped coin bank I designed on Fusion 360, my first submission here, and my first designed-from-scratch 3D printer model.
It features a threaded cap, coin slot that will fit a US Quarter Dollar, and all parts are designed to interlock for alignment and be epoxied together- there's not a lot of clearance in the mating surfaces, so depending on the precision of your printer, your mileage will vary. I had to do some sanding, trimming, and shaping for assembly. Supports were only really needed on the threaded top cap and the bottom cap of the shell body.
It's divided into multiple sections to keep any one print job from taking a really long time, though the body could be recombined into a top, middle, and bottom section if one were so inclined.
As I'm a noob, feedback is appreciated. Thanks!
It features a threaded cap, coin slot that will fit a US Quarter Dollar, and all parts are designed to interlock for alignment and be epoxied together- there's not a lot of clearance in the mating surfaces, so depending on the precision of your printer, your mileage will vary. I had to do some sanding, trimming, and shaping for assembly. Supports were only really needed on the threaded top cap and the bottom cap of the shell body.
It's divided into multiple sections to keep any one print job from taking a really long time, though the body could be recombined into a top, middle, and bottom section if one were so inclined.
As I'm a noob, feedback is appreciated. Thanks!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!