Another Spiderman Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 99.94x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.63829mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff00c5 PLA BambuLab Basic Magenta Transmission Distance: 3 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #17 (1.44mm) swap to Magenta At layer #19 (1.6mm) swap to Turquoise At layer #23 (1.92mm) swap to Yellow At layer #26 (2.16mm) swap to Jade White for the rest.