Thingiverse
Another spool holder
von saschagns
0
Downloads
1
Likes
0
Makes
This is just another filament holder, with the option to mount it anywhere through the four holes.
What you need for the filament holder is a bearing with an inner hole diameter of 8mm
and a thickness of 22mm. I used an outer diameter of 22mm. it will certainly also work with a thinner one if you adjust it accordingly with washers, for example.
You will also need m8 bolts and m8 nuts.
Enjoy :)
What you need for the filament holder is a bearing with an inner hole diameter of 8mm
and a thickness of 22mm. I used an outer diameter of 22mm. it will certainly also work with a thinner one if you adjust it accordingly with washers, for example.
You will also need m8 bolts and m8 nuts.
Enjoy :)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
