Anthony Carmelo - Knicks Hueforge

Project: anthony carmelo.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176.96x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Francofil Bleu 5002 Transmission Distance: 2 PLA BambuLab Basic Brown Transmission Distance: 1.4 PLA BambuLab Basic Orange Transmission Distance: 5.7 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Jade White At layer #12 (1.04mm) swap to Bleu At layer #13 (1.12mm) swap to Brown At layer #15 (1.28mm) swap to Orange At layer #17 (1.44mm) swap to Jade White Border Only Colors from here until the end. At layer #27 (2.24mm) swap to Bleu 5002 for the rest.