Anthony Mark 2 Bomb Trailer

This is approximately 1/6 scale. I say approximately because I cannot find any actual dimensions anywhere and used references from photos to approximate sizing to compliment the RocHobby 1/6 MB Scaler Willys Jeep. The cradle is sized to accept 1/6 scale 1000-pound bombs at ~78mm diameter. Assembly is pretty easy and straightforward but I would recommend that you review the assembly video from my YouTube channel for additional tips.

https://youtu.be/okbfhNJKq3w

There are a few additional pieces of hardware required for assembly:

* M4 x .7 x 16 Screws
* M4 x .7 x 20 Screws
* M4 threaded rod: https://www.mcmaster.com/93000A513/
* M4 x .7 hex nuts: https://www.mcmaster.com/90592A090/
* number 4 x 1/4" pan head screws: https://www.mcmaster.com/90935A131/
* 4 x 8 x 3 mm bearings: https://tinyurl.com/2y8rryty

Additionally, I used these other printables:

Wheels (be sure to re-size to 40mm overall diameter)
https://www.thingiverse.com/thing:3448541

Hitch (pintle) loop p