ANUBIS STEAMPUNK

Project: ANUBIS.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 95.27x169.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Bambula Matte charcoal Transmission Distance: 0.3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Blue At layer #9 (0.8mm) swap to Orange At layer #11 (0.96mm) swap to Latte Brown At layer #14 (1.2mm) swap to Ice Blue At layer #22 (1.84mm) swap to Jade White for the rest.