Anycubic Delta BLTouch Mount (Snap In)

This is a snap in mount for a BLTouch Probe.

Modified firmware can be found here:
https://drive.google.com/drive/folders/1jkTjVhCI2QgzkPRJZOA2ylaihRfyBJLN?usp=sharing

The firmware is based on a snapshot of the Marlin github repo from the beginning of November 2017. Configuration.h and Configuration_adv.h were updated to be correct for the linear plus version of the Anycubic Delta.

G33 - Delta auto calibration (http://marlinfw.org/docs/gcode/G033.html) works like a champ.

UBL support doesn't appear to be 100% working with the current Marlin snapshot and causes the Z-axis to jog upwards when printing near the outer boundary of the build plate, thus it's been disabled in the firmware.

The Delta auto calibration gets things close enough on my machine to be able to print to 90% of the build plate area without any adhesion issues and with only a 5 line skirt to prime the extruder.

Fusion 360 link: http://a360.co/2j6ZUGu

Video of it in action: https://photos.app.goo.gl/