Anycubic i3 Mega - Dial indicator mounting bracket

Yet another dial indicator mount for the i3 Mega.

The bracket snaps onto the linear rails and the dial indicator is held in place with a 1/4" bolt. Use a bolt that has a smooth shoulder before the threads start so it fits snugly through the hole on the dial indicator.


**Usage instructions:**
-Seat the dial indicator into the mounting bracket and fix in place with 1/4" bolt.
There is a few tricks to leveling the bed correctly.

1) Pre-heat the bed and hotend (To what you will actually be using it at)
2) Make sure the nozzle is clear of oozing plastic
3) Home X,Y,Z
4) Move the bed down a bit so the nozzle wont scratch the bed surface when doing the next step (Use the 4 corner dials)
5) Move the hotend in about 1" from the home position in both the X, and Y axis. You don't want to take dial readings right on the edge of the buildplate.
6) Slowly bring up the bed until the nozzle just touches the bed surface using the 4 corner dials. (Then promptly move to the next step as