Anycubic Kobra 2 Max Bed Level First Layer

This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on Kobra 2 Max Squares are bed screws.Circles are added points for extra reference. Run Brim test first to dial in your Z offset. This will save filament and time.Open as project for .3mf If you have a different version printer and want to run this just select your printer in slicer and filament you want to test it on. And when prompted transfer settings. At the end discard settings.Second Pick the model of bed squares your bed is set to in slicer. Run this and check for low and high spots in bed. Try to find a happy medium between all square. Chasing perfection or extreme case if your bed is too far out and you can't find a happy medium for your first layer you can manually shim the bed. The two most popular methods are silicon mod and nylon mod will le