Anycubic Kobra 2 Pro Bed Level First Layer Test

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in your Z offset. This will save filament and time.Open as project for .3mf If you have a different version printer and want to run this just select your printer in slicer and filament you want to test it on. And when prompted transfer settings. At the end discard settings.Second Pick the model of bed squares your bed is set to in slicer. Run this and check for low and high spots in bed. Try to find a happy medium between all square. Chasing perfection or extreme case if your bed is too far out and you can't find a happy medium for your first layer you can manually shim the bed. The two most popular methods are silicon mod and nylon mod will leave a link at the bottom in reference material to example video.Download The Anycubic Dial Indicator Mount a